Liquid System terminal tube

All our Linear Low Density Polyethylene (LLDPE) tubing is custom made and is extruded to exacting tolerances and has been formulated to provide UV stability, a hard-wearing outer surface, and the ability to be manipulated into tight radius situations without crushing. There is various size terminal & delivery tube for greater flexibility.

TUBING VARIATIONS
3.0mm OD X 1.2mm ID
(Orange) ORDER CODE: BL-204385.03
This 3.0mm FIBP (Friction Induced Back Pressure) tube has been specially developed for utilisation with high viscosity / hard-to-handle liquids and ultra-low rate application regimes. Selected to suit to suit 1/4” (6.35mm) OD stainless steel delivery tube. (Included in terminal configurations LQS-AT3F)
4.0mm OD X 1.8mm ID
(Purple) ORDER CODE: BL-204352
This 4.0mm is used for low-rate terminal solution. (Included in terminal configurations LQS-AT4F
5.0mm OD X 1.2mm ID
(Yellow) ORDER CODE: BL-204394
This FIBP (Friction Induced Back Pressure) tube has been specially developed for utilisation with high viscosity / hard-to-handle liquids and ultra-low rate application regimes. (Included in terminal configurations LQS-AT5F
5.0mm OD X 1.8mm ID
(Purple & Black stripe) ORDER CODE: BL-2044402
This FIBP (Friction Induced Back Pressure) tube has been specially developed for utilisation with high viscosity / hard-to-handle liquids and ultra-low rate application regimes. (Included in terminal configurations LQS-AT5PBF
5.0mm OD X 2.5mm ID
(Black & Yellow stripe) ORDER CODE: BL-204390
The 5.0mm has been introduced to facilitate easier system installation and maintenance on our air seeder systems. The bore size of this tube provides good stream control and eliminates the requirement for terminal jets. (Included in terminal configurations LQS-ATST, LQS-PTST)
6.0mm OD X 4.2mm ID
(Yellow & Black stripe) ORDER CODE: BL-204396
The 6.0mm tube is being introduced specifically as a dealer sourced retro-fit for planters. It is a push-fit and passes through the larger 12.75mm X 10.0mm stainless steel ope